Heat Sealing Foil Facing-FSKV50A
- TECHNICAL DATA
- GALLERY
- INFO FORM
FSKV50A
Heat-Sealing Foil-Scrim-Kraft Facing
Views：218
Product Description
FSKV50Ais a Heat-Sealing Foil-Scrim-Kraft Facingconsisting of aluminum foil, tri-directional scrim and 50gsm virgin Kraft andthen coating heat-activated polyethylene on the Kraft side. It is suitable foron-line laminating by heating with glass wool, rock wool, mineral wool andother thermal insulation materials. No need applying extra adhesive, moreenvironment friendly. Good corrosion resistance.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing | Fiberglass | 8 /100mm- MD |
12 /100mm- XD | ||
Adhesive | High Temperature Glue | ------ |
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 20 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 100 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength | 130 N/25mm- MD | ASTM D828 |
65 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -30 °C/+90 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.20 m,1.25m,1.30m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
FSKV50A
Heat-Sealing Foil-Scrim-Kraft Facing
Views：218
Product Description
FSKV50Ais a Heat-Sealing Foil-Scrim-Kraft Facingconsisting of aluminum foil, tri-directional scrim and 50gsm virgin Kraft andthen coating heat-activated polyethylene on the Kraft side. It is suitable foron-line laminating by heating with glass wool, rock wool, mineral wool andother thermal insulation materials. No need applying extra adhesive, moreenvironment friendly. Good corrosion resistance.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing | Fiberglass | 8 /100mm- MD |
12 /100mm- XD | ||
Adhesive | High Temperature Glue | ------ |
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 20 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 100 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength | 130 N/25mm- MD | ASTM D828 |
65 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -30 °C/+90 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.20 m,1.25m,1.30m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.
