Heat Sealing Foil Facing-FKSV50A
- TECHNICAL DATA
- GALLERY
- INFO FORM
FKSV50A
Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier
Views:255
Product Description
FKSV50Ais a Heat-Sealing Foil -Kraft-Scrim Facingconsisting of aluminum foil, 50gsm virgin Kraft and tri-directional scrim and thencoating heat-activated polyethylene on the Kraft side. It is an ideal facingfor thermal insulation materials, suitable for on-line laminating by heatingwith insulation materials such as glass wool, rock wool, mineral wool etc. Noneed applying extra adhesive and environment friendly. Good corrosionresistance. Because scrim is on the back side of Kraft, foil surface is betterabrasive-resistant than FSK facing.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Adhesive | Heat-Resistance Glue | -- |
Reinforcing | Glass Fiber Scrim | 8 /100mm- MD |
16 /100mm- XD | ||
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 25 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 100 gsm | Scale |
Tensile Strength | 130 N/25mm- MD | ASTM D828 |
65 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -29 °C/+66 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.0m,1.20 m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
FKSV50A
Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier
Views:255
Product Description
FKSV50Ais a Heat-Sealing Foil -Kraft-Scrim Facingconsisting of aluminum foil, 50gsm virgin Kraft and tri-directional scrim and thencoating heat-activated polyethylene on the Kraft side. It is an ideal facingfor thermal insulation materials, suitable for on-line laminating by heatingwith insulation materials such as glass wool, rock wool, mineral wool etc. Noneed applying extra adhesive and environment friendly. Good corrosionresistance. Because scrim is on the back side of Kraft, foil surface is betterabrasive-resistant than FSK facing.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Adhesive | Heat-Resistance Glue | -- |
Reinforcing | Glass Fiber Scrim | 8 /100mm- MD |
16 /100mm- XD | ||
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 25 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 100 gsm | Scale |
Tensile Strength | 130 N/25mm- MD | ASTM D828 |
65 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -29 °C/+66 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.0m,1.20 m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.