Contact Supplier

Inquire Now!
Skype

cntago

X
GET QUOTE NOW
subject : *
Whatsapp

+8613584110889

Heat Sealing Foil Facing-FKSV50B

  • TECHNICAL DATA
  • GALLERY
  • INFO FORM

FKSV50B

Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier


Views:299
Product Description
FKSV50B is a Heat-SealingFoil-Scrim-Kraft Facing consisting of aluminum foil, two-directional scrim and 50gsmKraft and then coating heat-activated polyethylene on the Kraft side. It is anideal facing for thermal insulation materials, suitable for on-line laminatingby heating with insulation materials such as glass wool, rock wool, mineralwool etc. No need applying extra adhesive and environment friendly. Goodcorrosion resistance. Because scrim is on the back side of Kraft, foil surfaceis better abrasive-resistant than FSK facing.
Construction
Facing Composition
Description
Value (Metric)
Foil
Aluminum
7 micron
Adhesive
Heat-Resistance Glue
--
Reinforcing
Glass Fiber Scrim
12.5x12.5 mmspace
Kraft
Natural
50gsm
Heat-Activated Coating
Polyethylene
25 micron
Typical Physical Property
Physical Property
Value (Metric)
Test Method
Basic Weight
100 gsm
Scale
Tensile Strength
135 N/25mm- MD
ASTM D828
70 N/25mm- XD
Burst Strength
35 N/cm2
ASTM D774
Temperature Resistance
Remains Flexible
No Delamination
ASTM C1263
-29 °C/+66 °C
Dimensional Stability
Less than 0.5%
ASTM D1204 @150F(65C)
Emissivity
0.03
ASTM E408
Available Roll Width:1.20 m
  
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.
 

Similar products

More+
  • TECHNICAL DATA
  • GALLERY
  • INFO FORM

FKSV50B

Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier


Views:299
Product Description
FKSV50B is a Heat-SealingFoil-Scrim-Kraft Facing consisting of aluminum foil, two-directional scrim and 50gsmKraft and then coating heat-activated polyethylene on the Kraft side. It is anideal facing for thermal insulation materials, suitable for on-line laminatingby heating with insulation materials such as glass wool, rock wool, mineralwool etc. No need applying extra adhesive and environment friendly. Goodcorrosion resistance. Because scrim is on the back side of Kraft, foil surfaceis better abrasive-resistant than FSK facing.
Construction
Facing Composition
Description
Value (Metric)
Foil
Aluminum
7 micron
Adhesive
Heat-Resistance Glue
--
Reinforcing
Glass Fiber Scrim
12.5x12.5 mmspace
Kraft
Natural
50gsm
Heat-Activated Coating
Polyethylene
25 micron
Typical Physical Property
Physical Property
Value (Metric)
Test Method
Basic Weight
100 gsm
Scale
Tensile Strength
135 N/25mm- MD
ASTM D828
70 N/25mm- XD
Burst Strength
35 N/cm2
ASTM D774
Temperature Resistance
Remains Flexible
No Delamination
ASTM C1263
-29 °C/+66 °C
Dimensional Stability
Less than 0.5%
ASTM D1204 @150F(65C)
Emissivity
0.03
ASTM E408
Available Roll Width:1.20 m
  
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.