Heat Sealing Foil Facing-FGV1808

Provide a complete set of solutions

for insulation, heat insulation, packaging and compounding.

SEND A MESSAGE

  • TECHNICAL DATA

FGV1808

Foil-Fiberglass Facing, Radiant & Vapor Barrier


Views:389
Product Description
FGV1808 is a premium gradeAlum Glass Cloth facing consisting of aluminum foil and fiberglass clothlaminated by FR adhesive and coating polyethylene one the back side of glass cloth.With high tensile strength and good abrasive-resistance, it is good as a vaporbarrier of duct wrap, duct board and pipe insulation. It is suitable to facerock wool, glass wool, mineral wool on-line by heating, no need extra adhesive.
Construction
Facing Composition
Description
Value (Metric)
Foil
Aluminum
18 micron
Adhesive
FR Adhesive
--
Glass Cloth
Fiber glass
95 gsm
Film
PE coating
40 microns
Typical Physical Property
Physical Property
Test Method
Value (Metric)
Basic Weight
Scale
195 gsm
Permeance (WVTR)
ASTM E96, Procedure A
5.75 ng/N.s
Tensile Strength - MD
ASTM D828
255 N/25mm
Tensile Strength - XD
ASTM D828
178 N/25mm
Burst Strength
ASTM D774
126 N/cm2
Dimensional Stability
ASTM D1204 @150F(65C)
Less than 0.5%
Emissivity
ASTM E408
0.03
Available Roll Width:1.0m,1.2m
 
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.