Reinforced Aluminum Foil Facing-FSK50B
- TECHNICAL DATA
- GALLERY
- INFO FORM
FSK50B
Foil-Scrim-Kraft Facing - Vapor & Radiant Barrier
Views：184
Product Description
FSK50B is a commercialgrade Foil-Scrim-Kraft Facing with two-directional fiberglass scrim and 50gsmvirgin Kraft. It is designed for those clients who like foil insulation is reinforcedwith square shape scrim. It is most commonly used as a facing for duct wrapinsulation, Also used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter as a radiant barrier for its low emissivity.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing | Fiberglass | 8 /100mm- MD |
8 /100mm- XD | ||
Adhesive | Polyethylene | -- |
Kraft | Natural | 50gsm |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basis Weight | 85 gsm | Scale |
Permeance | 5.75 ng/N.s | ASTM E96 |
Tensile Strength | 116 N/25mm- MD | ASTM D828 |
56 N/25mm- XD | ||
Burst Strength | 30 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -30 °C/+90 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Roll Width:1.0m,1.2m,1.25m;
Roll length from60mup to2800M.
Remarks:
1. Above data are typicalresults and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
FSK50B
Foil-Scrim-Kraft Facing - Vapor & Radiant Barrier
Views：184
Product Description
FSK50B is a commercialgrade Foil-Scrim-Kraft Facing with two-directional fiberglass scrim and 50gsmvirgin Kraft. It is designed for those clients who like foil insulation is reinforcedwith square shape scrim. It is most commonly used as a facing for duct wrapinsulation, Also used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter as a radiant barrier for its low emissivity.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing | Fiberglass | 8 /100mm- MD |
8 /100mm- XD | ||
Adhesive | Polyethylene | -- |
Kraft | Natural | 50gsm |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basis Weight | 85 gsm | Scale |
Permeance | 5.75 ng/N.s | ASTM E96 |
Tensile Strength | 116 N/25mm- MD | ASTM D828 |
56 N/25mm- XD | ||
Burst Strength | 30 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -30 °C/+90 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Roll Width:1.0m,1.2m,1.25m;
Roll length from60mup to2800M.
Remarks:
1. Above data are typicalresults and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.
