Contact Supplier

Inquire Now!
Skype

cntago

X
GET QUOTE NOW
subject : *
Whatsapp

+8613584110889

Reinforced Aluminum Foil Facing-FSK50A

  • TECHNICAL DATA
  • GALLERY
  • INFO FORM

FSK50A

Foil-Scrim-Kraft Facing - Vapor & Radiant Barrier


Views:407
Product Description
FSK50A is a commercialgrade Foil-Scrim-Kraft Facing with tri-directional fiberglass scrim and 50gsmKraft, most commonly used as a facing for duct wrap insulation and roof insulation,Also used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter as a radiant barrier for its low emissivity.
 
Construction
Facing Composition
Description
Value (Metric)
Foil
Aluminum
7 micron
Reinforcing
Fiberglass
8 / 100mm - MD
12 / 100mm - XD
Adhesive
Polyethylene
--
Kraft
Natural
50gsm
 
Typical Physical Property
Physical Property
Value (Metric)
Test Method
Basis Weight
85 gsm
Scale
Permeance
5.75 ng/N.s
ASTM E96
Tensile Strength
115 N/25mm - MD
ASTM D828
50 N/25mm - XD
Burst Strength
30 N/cm2
ASTM D774
Temperature Resistance
Remains Flexible
No Delamination
ASTM C1263
- 30 °C/+66 °C
Reflectivity of foil surface
97%
--
Roll Width: 1.0m,1.2m, 1.25m, 1.30m, 1.35m;
Roll lengthfrom 60m up to 3500M.
Core:76mm or 50mm.
 
Remarks:
1. Above data are typicalresults and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.

Similar products

More+
  • TECHNICAL DATA
  • GALLERY
  • INFO FORM

FSK50A

Foil-Scrim-Kraft Facing - Vapor & Radiant Barrier


Views:407
Product Description
FSK50A is a commercialgrade Foil-Scrim-Kraft Facing with tri-directional fiberglass scrim and 50gsmKraft, most commonly used as a facing for duct wrap insulation and roof insulation,Also used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter as a radiant barrier for its low emissivity.
 
Construction
Facing Composition
Description
Value (Metric)
Foil
Aluminum
7 micron
Reinforcing
Fiberglass
8 / 100mm - MD
12 / 100mm - XD
Adhesive
Polyethylene
--
Kraft
Natural
50gsm
 
Typical Physical Property
Physical Property
Value (Metric)
Test Method
Basis Weight
85 gsm
Scale
Permeance
5.75 ng/N.s
ASTM E96
Tensile Strength
115 N/25mm - MD
ASTM D828
50 N/25mm - XD
Burst Strength
30 N/cm2
ASTM D774
Temperature Resistance
Remains Flexible
No Delamination
ASTM C1263
- 30 °C/+66 °C
Reflectivity of foil surface
97%
--
Roll Width: 1.0m,1.2m, 1.25m, 1.30m, 1.35m;
Roll lengthfrom 60m up to 3500M.
Core:76mm or 50mm.
 
Remarks:
1. Above data are typicalresults and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.