DS Reflective Aluminum Foil Insualtion-RAC100A
- TECHNICAL DATA
- GALLERY
- INFO FORM
RAC-100A
Double-Sided Reflective Alum. Foil Insulation
Views:216
Product Description
RAC-100Ais a premium grade double-sided Foil Insulationwith 2 layers of aluminum foil and 100gsm natural Kraft paper bonded togetherpolyethylene and reinforced with tri-directional fiberglass scrim. ThickerKraft enhances tensile strength, tear resistant and durability, and it providesneat appeance. It is mainly used under roofdecking, under attic rafters, over existing attic insulation, infloors, walls and crawl spaces, and in industrial and commercial buildingsas radiant barrier to block radiant heat coming into house during summer andretain indoor heat generated during the winter.
Construction
Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing - MD | Fiberglass | 8 /100mm |
Reinforcing - XD | Fiberglass | 12 /100mm |
Adhesive | Polyethylene | -- |
Kraft | Natural | 100 gsm |
Adhesive | Polyethylene | -- |
Foil | Aluminum | 7 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basis Weight | 170 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 250 N/25mm | ASTM D828 |
Tensile Strength - XD | 125 N/25mm | ASTM D828 |
Burst Strength | 80 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -40 °C/+116 °C |
Reflectivity | 97% | -- |
Available Roll Width:1.20m,1.25m,1.30m
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4.Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
RAC-100A
Double-Sided Reflective Alum. Foil Insulation
Views:216
Product Description
RAC-100Ais a premium grade double-sided Foil Insulationwith 2 layers of aluminum foil and 100gsm natural Kraft paper bonded togetherpolyethylene and reinforced with tri-directional fiberglass scrim. ThickerKraft enhances tensile strength, tear resistant and durability, and it providesneat appeance. It is mainly used under roofdecking, under attic rafters, over existing attic insulation, infloors, walls and crawl spaces, and in industrial and commercial buildingsas radiant barrier to block radiant heat coming into house during summer andretain indoor heat generated during the winter.
Construction
Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing - MD | Fiberglass | 8 /100mm |
Reinforcing - XD | Fiberglass | 12 /100mm |
Adhesive | Polyethylene | -- |
Kraft | Natural | 100 gsm |
Adhesive | Polyethylene | -- |
Foil | Aluminum | 7 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basis Weight | 170 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 250 N/25mm | ASTM D828 |
Tensile Strength - XD | 125 N/25mm | ASTM D828 |
Burst Strength | 80 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -40 °C/+116 °C |
Reflectivity | 97% | -- |
Available Roll Width:1.20m,1.25m,1.30m
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4.Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.