DS Reflective Aluminum Foil Insualtion-RAM60BDS
- TECHNICAL DATA
- GALLERY
- INFO FORM
RAM-60B
Double-Sided Reflective Alum. Foil Insulation
Views:148
Product Description
RAM-60B is a light duty, economical grade double-sided FoilInsulation made of one layer aluminum foil and 1 layer of metallized polyesterfilm with B grade Kraft paper bonded together with polyethylene and reinforcedwith two-directional fiberglass scrim. It is mainly used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings asradiant barrier to block radiant heat coming into house during summer andretain indoor heat generated during the winter. Also used as a water vaporbarrier in air conditioning ductworks and cold rooms combining with traditionalinsulation such as glass wool, rock wool, it is excellent as a vapor barrierfor air-conditioning ducts, pipes and vessels.
Construction
Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing - MD | Fiberglass | 8 / 100mm |
Reinforcing - XD | Fiberglass | 8 / 100mm |
Adhesive | Polyethylene | -- |
Kraft | B grade Kraft | 60gsm |
Adhesive | Polypropylene | -- |
Film | Metallized Polyester | 12.5 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 125 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 180 N/25mm | ASTM D828 |
Tensile Strength - XD | 90 N/25mm | ASTM D828 |
Burst Strength | 65 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | Remains Flexible No Delamination |
Reflectivity of foil surface | 97% | -- |
Available Roll Width: 1.25 m, Roll Length:40M, 60M etc.
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4.Please do trial-application and make sure thSimilar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
RAM-60B
Double-Sided Reflective Alum. Foil Insulation
Views:148
Product Description
RAM-60B is a light duty, economical grade double-sided FoilInsulation made of one layer aluminum foil and 1 layer of metallized polyesterfilm with B grade Kraft paper bonded together with polyethylene and reinforcedwith two-directional fiberglass scrim. It is mainly used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings asradiant barrier to block radiant heat coming into house during summer andretain indoor heat generated during the winter. Also used as a water vaporbarrier in air conditioning ductworks and cold rooms combining with traditionalinsulation such as glass wool, rock wool, it is excellent as a vapor barrierfor air-conditioning ducts, pipes and vessels.
Construction
Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Reinforcing - MD | Fiberglass | 8 / 100mm |
Reinforcing - XD | Fiberglass | 8 / 100mm |
Adhesive | Polyethylene | -- |
Kraft | B grade Kraft | 60gsm |
Adhesive | Polypropylene | -- |
Film | Metallized Polyester | 12.5 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 125 gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 180 N/25mm | ASTM D828 |
Tensile Strength - XD | 90 N/25mm | ASTM D828 |
Burst Strength | 65 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | Remains Flexible No Delamination |
Reflectivity of foil surface | 97% | -- |
Available Roll Width: 1.25 m, Roll Length:40M, 60M etc.
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4.Please do trial-application and make sure th