Single Sided Aluminum Foil Woven-FPE100
- TECHNICAL DATA
- GALLERY
- INFO FORM
FPE100
Foil-Fabric Woven- Radiant Barrier & Vapor Barrier
Views:263
Product Description
FPE100 is a commercial grade Foil-PE woven Fabric vapor barrier, made of single faced aluminum foil and a reinforcement of PE woven fabric. With high tensile strength, tear resistant and good abrasive-resistance, it is a good choice for radiant barrier applications and machine packing. It is used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house during the summer and retain indoor heat generated during the winter.
Construction:
Aluminum foil: 7 Microns/Binder: Polyethylene/PE Woven Fabric
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 240 N/25mm | ASTM D828 |
Tensile Strength - XD | 240 N/25mm | ASTM D828 |
Burst Strength | 250N/cm2 | ASTM D774 |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Available Roll Width:1.20m,1.25m,1.50m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wet and heat source. Rolls should never be stored in direct contact with the ground or on concrete slabs.
4. Please do trial-application and make sure the product can serve the specific application before actually put it to use.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
FPE100
Foil-Fabric Woven- Radiant Barrier & Vapor Barrier
Views:263
Product Description
FPE100 is a commercial grade Foil-PE woven Fabric vapor barrier, made of single faced aluminum foil and a reinforcement of PE woven fabric. With high tensile strength, tear resistant and good abrasive-resistance, it is a good choice for radiant barrier applications and machine packing. It is used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house during the summer and retain indoor heat generated during the winter.
Construction:
Aluminum foil: 7 Microns/Binder: Polyethylene/PE Woven Fabric
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 240 N/25mm | ASTM D828 |
Tensile Strength - XD | 240 N/25mm | ASTM D828 |
Burst Strength | 250N/cm2 | ASTM D774 |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Available Roll Width:1.20m,1.25m,1.50m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wet and heat source. Rolls should never be stored in direct contact with the ground or on concrete slabs.
4. Please do trial-application and make sure the product can serve the specific application before actually put it to use.