Single Sided Aluminum Foil Woven-FPE100
- TECHNICAL DATA
- GALLERY
- INFO FORM
Foil-Fabric Woven- Radiant Barrier & Vapor Barrier
Views：274
ProductDescription
FPE100 is a commercialgrade Foil-PE woven Fabric vapor barrier, made of single faced aluminum foil anda reinforcement of PE woven fabric. With high tensile strength, tear resistantand good abrasive-resistance, it is a good choice for radiant barrier applicationsand machine packing. It is used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter.
Construction:
Aluminum foil: 7Microns/Binder: Polyethylene/PE Woven Fabric
TypicalPhysical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 240 N/25mm | ASTM D828 |
Tensile Strength - XD | 240 N/25mm | ASTM D828 |
Burst Strength | 250N/cm2 | ASTM D774 |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Available Roll Width:1.20m,1.25m,1.50m
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
Foil-Fabric Woven- Radiant Barrier & Vapor Barrier
Views：274
ProductDescription
FPE100 is a commercialgrade Foil-PE woven Fabric vapor barrier, made of single faced aluminum foil anda reinforcement of PE woven fabric. With high tensile strength, tear resistantand good abrasive-resistance, it is a good choice for radiant barrier applicationsand machine packing. It is used under roofdecking, under attic rafters, over existing attic insulation, in floors,walls and crawl spaces, and in industrial and commercial buildings toblock radiant heat coming into house during the summer and retain indoor heatgenerated during the winter.
Construction:
Aluminum foil: 7Microns/Binder: Polyethylene/PE Woven Fabric
TypicalPhysical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105gsm | Scale |
Permeance (WVTR) | 1.15 ng/N.s | ASTM E96, Procedure A |
Tensile Strength - MD | 240 N/25mm | ASTM D828 |
Tensile Strength - XD | 240 N/25mm | ASTM D828 |
Burst Strength | 250N/cm2 | ASTM D774 |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Reflectivity of foil surface | 97% | -- |
Available Roll Width:1.20m,1.25m,1.50m
Remarks:
1. Above data are typical results and not theguaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and makesure the product can serve the specific application before actually put it touse.
