Aluminum Foil Facing
Reflective Aluminum Foil
Heat Sealing Aluminum Foil
PP Facing for Metal Building

 

Metalized PET Woven Fabric

MPE100


Construction:
aluminum foil woven fabric construction
Composition Description Value (English) Value (Metric)
Alum.Foil Metalized PET 0.46 mil 12 Microns
Adhesive Polyethylene -- --
Woven Fabric PE woven Fabric

36.6 lbs / 3000 ft2

60 gsm


Typical Physical Property

Physical Property Value (English) Value (Metric) Test Method
Basis Weight 22 lbs / 1000 ft2 110 gsm Scale
Tensile Strength-MD 56.7 lbs/in 250 N/25mm ASTM D828
Tensile Strength-XD 56.7 lbs/in 250 N/25mm ASTM D828
Burst Strength 385.8psi 265 N/cm2 ASTM D774
Temperature Resistance Remains Flesxible
No Delamination
Remains Flesxible
No Delamination
ASTM C1263
- 29 °C/+66 °C


Applications

Our Metalized PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms.
Also used as material to make car sun shade.

Different lengths and basic weight are available.
Available Roll Width: 1.2m, 1.25m,1.3M

Remarks
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from wet and heat source.
4. Please do trial-application and make sure the product can serve the specific application before actually put it to use.

 

Alum. Foil Glass Lamination
Aluminum Foil for Flexible Duct
Thermal Insulation
Self-Adhesive Tape
 
 
 
 
 
 
 
 
 
 
 
 
   
   
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Back to Top  
  Welcome to contact Myriad Corporation.  
  Copyright ) 2009 www.umyriad.com, All right reserved.