Aluminum Foil Facing
Reflective Aluminum Foil
Heat Sealing Aluminum Foil
PP Facing for Metal Building

 

Aluminium Foil Lamination for Flexible Duct

FSM40A


Construction:		 construction of FSK
Composition Description Value (English) Value (Metric)
Foil Aluminum foil 0.28 mil 7 Microns
Reinforcing-MD Glass Fiber 2 / inch 8 / 100mm
Reinforcing-MD 3 / inch 12 / 100mm
Adhesive Polyethylene -- --
Foil Metalized Film 0.48 mil 12 Microns


Typical Physical Property

Physical Property Value (English) Value (Metric) Test Method
Basis Weight 8.2 lbs / 1000 ft2 40 gsm Scale
Tensile Strength-MD 16 lbs/in 70 N/25mm ASTM D828
Tensile Strength-XD 8 lbs/in 35 N/25mm
Burst Strength 40 psi 28 N/cm2 ASTM D774
Temperature Resistance Remains Flesxible
No Delamination 		Remains Flesxible
No Delamination 		ASTM C1263
- 29 °C/+66 °C
Permeance 0.1 perm 5.75 ng/N.s ASTM E96

Emissivity

0.03

0.03

ASTM E408


Applications

FSM40A is a light duty, economical grade double side foil insulatio made of one layer of aluminium foil and Metalized PET bonded together with flame resistant adhesive and reinforced with tri-way scrim. It is mainly used to wrap flexible duct outside the glass wool,to protect glass wool and prevent vapour from contacting glass wool.

Roll Width: 1.0m,1.20m,1.25m,1.30m etc.
Roll Length: Various roll length is available, up to 4000M each roll, the usual roll length is 300M.

Remarks
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from wet and heat source.
4. Please do trial-application and make sure the product can serve the specific application before actually put it to use.

 

Alum. Foil Glass Lamination
Aluminum Foil for Flexible Duct
Thermal Insulation
Self-Adhesive Tape
 
 
 
 
 
 
 
 
 
 
 
 
   
   
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Back to Top  
  Welcome to contact Myriad Corporation.  
  Copyright ) 2011 www.umyriad.com, All right reserved.