Wuxi Myriad Corporation-Foil PET for Flexible Duct

Aluminum Foil Facing

Reflective Aluminum Foil

Heat Sealing Aluminum Foil

PP Facing for Metal Building

Aluminium Foil PET for Flexible Duct FPETF60
	Construction:

Composition	Description	Value (English)	Value (Metric)
Alum.Foil	Aluminum foil	0.28 mil	7 Microns
Adhesive	EMAA	0.12	3 Microns
Film	Polyester Film	0.48 mil	12 Microns
Adhesive	EMAA	0.12	3 Microns
Alum.Foil	Aluminum foil	0.28 mil	7 Microns

Typical Physical Property

Physical Property	Value (English)	Value (Metric)	Test Method
Basis Weight	12.3 lbs / 1000 ft2	60 gsm	Scale
Tensile Strength-MD	29.6 lbs/in	130 N/25mm	ASTM D828
Tensile Strength-XD	29.6 lbs/in	130 N/25mm	ASTM D828
Burst Strength	48 psi	60 N/cm2	ASTM D774
Temperature Resistance	Remains Flesxible No Delamination	Remains Flesxible No Delamination	ASTM C1263 - 29 °C/+66 °C
Elongation	>20%	>20%	ASTM 882
Emissivity	0.03	0.03	ASTM E408

Applications

FPETF60 is made of two layers of aluminium foil and Transparent PET film bonded together with EMAA. It is mainly used to produce flexible duct and wrap cable. It,s double side aluminum foil and PET film lamination, is much stronger than single side aluminum foil PET.

Roll Width: from 50mm up to 500mm.
Roll Length: Various roll length is available, up to 6000M each roll.

Remarks
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from wet and heat source.
4. Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Alum. Foil Glass Lamination

Aluminum Foil for Flexible Duct

Thermal Insulation

Self-Adhesive Tape

Welcome to contact Myriad Corporation.